Fit-Out Is Where the Repetition Hides: Why We Built XD Fit-Out

Hotel rooms, retail stores and office floors repeat the same details hundreds of times. XD Fit-Out automates that work inside Revit, from CAD layouts to framing, finishes, MEP openings, documentation and model checks.

Designer using XD Fit-Out Ceiling Framing and Joinery Builder in Revit
Designer using XD Fit-Out Ceiling Framing and Joinery Builder in Revit

Anas ayoub

Walk through a finished hotel and count the rooms that look almost the same. Visit a retail brand's stores in five cities and notice how many details repeat. Fit-out is full of patterns: the same partition build-up, the same skirting, the same ceiling grid, the same joinery unit, again and again.

On paper, repetition should make fit-out easy to document. In practice, it is where a large share of manual effort hides. Every wall still needs its finishes and framing. Every ceiling still needs openings for services. Every family still needs the right data. And every change to the design ripples through hundreds of nearly identical spaces.

At XD House, we have spent years delivering fit-out work across retail, hospitality and office projects. Today we are launching XD Fit-Out, a Revit plug-in that automates fit-out drawings, models and documentation, all inside Revit.

Why fit-out documentation takes so long

Fit-out sits at the end of the design chain. It inherits the architecture, the structure and the services, and then adds its own layer of detail on top. That position creates a few recurring problems.

  • Starting from CAD. Many fit-out packages still begin as 2D CAD layouts. Turning those into Revit elements is slow, manual and easy to get wrong.

  • Detail that multiplies. A single partition type may need finishes, sweeps, encasements and framing. Multiply that by every wall in every room, and the modelling effort grows quickly.

  • Late coordination with services. Ceiling and wall openings for ducts, pipes, conduit and cable trays are often added late, after MEP models change. Missed openings become site problems.

  • Messy data. Families, parameters and materials arrive from many sources, with inconsistent names and missing information, which makes schedules and quantities unreliable.

  • Documentation that drifts. Sheets, legends and schedules are often finished by hand. When the model changes, the drawings fall behind.

None of these tasks is difficult on its own. The challenge is volume. When a project has hundreds of rooms or dozens of stores, small manual steps add up to weeks of work.

XD Fit-Out Ceiling Opening By System dialog in Revit on a laptop

Where XD Fit-Out came from

Like our other plug-ins, XD Fit-Out was not designed in isolation. It grew out of real projects where our team needed to deliver more fit-out detail, faster, than standard tools allowed.

The biggest influence was EssilorLuxottica's global retail programme. XD House supported the team on industrialisation and Design for Manufacture and Assembly (DfMA), including a data-driven report comparing modular and traditional store construction across timeline, rent and material costs. That analysis supported the decision to roll out modular DfMA stores across North America, a decision made on numbers, not on slides.

Caterina Peretti, Construction Industrialization PM at EssilorLuxottica, described the work this way: "XD House is supporting us in advancing digital construction, DFMA, and automation for our global retail projects."

Modular retail depends on standardised, repeatable details that can be manufactured and assembled with confidence. Building those details by hand in every model did not scale. So we started automating them, and those workflows became XD Fit-Out.

What XD Fit-Out does

XD Fit-Out adds its own tab to the Revit ribbon, with tools grouped by stage of the fit-out workflow:

  • Setup: links and worksets, so the model is organised before any fit-out work begins.

  • Asset Registry: tools to rename and load families, manage schedule data and type data through Excel, edit and map parameters, and manage materials, so every element carries clean, consistent information.

  • Model Assist: the core modelling tools. Create elements from CAD, apply wall finishes, wall sweeps and encasements, generate wall framing and ceiling framing, add ceiling coves, and build geometry families and joinery with the Joinery Builder.

  • Interfacing: create openings for MEP services, build selection sets, run clash detection and produce clash reports, so fit-out and services are coordinated in the model.

  • Documentation: sheet tools, drafting tools, legends by view and Auto-Doc for automated documentation.

  • QA & Cleanup: parameter audits, room element checks, a model health check, a tool to isolate warnings, and Purge All, so the model stays clean and reliable before every issue.

  • Export and AI Assist: export tools for project outputs, and AI Assist, part of our wider work on AI for construction.

XD Fit-Out tab in the Revit ribbon showing Model Assist, Interfacing and Documentation tools

A closer look: ceilings, from framing to openings

Ceilings are a good example of how much hidden work fit-out involves, and of how XD Fit-Out handles it. Two tools in particular show the approach.

Ceiling Framing. Framing a suspended ceiling by hand in Revit means placing every perimeter member, joist and row of blocking individually, then trimming them to the shape of the room. XD Fit-Out replaces a ceiling, or any face you pick, with line-based framing. Perimeter beams follow the edges of the ceiling, and joists and cross-blocking are clipped to its shape automatically. Spacing, offsets and member types come from a saved template, and you can preview the result before committing it.

Ceiling Opening By System. Once the ceiling is modelled, it has to make room for services. This tool reads the MEP elements, from the active model, a linked Revit model or a hand-picked selection, and cuts openings in the ceilings automatically. You choose which categories to include, such as pipes, conduit, ducts and cable trays, and set a padding distance around each service. Very small openings can be ignored, and pipes can be given circular openings where needed.

Together, these tools turn two of the most repetitive ceiling tasks into a few clicks, and keep framing and openings in step with the latest services model. The same approach applies to walls, with Wall Framing, wall finishes, sweeps and encasements.

For DfMA and modular projects, that level of detail matters. A framed, coordinated ceiling in the model is much closer to something a manufacturer can actually build.

XD Fit-Out Ceiling Framing tool generating framing for a suspended ceiling in Revit

How it fits into your workflow

XD Fit-Out is designed around the order in which fit-out work actually happens:

  1. Set up the model. Organise links and worksets, then use the Asset Registry tools to load families and make sure parameters, materials and type data are clean and consistent.

  2. Bring in the layout. Create elements from the CAD fit-out plan instead of tracing it by hand.

  3. Add the detail. Apply finishes, sweeps and encasements, frame walls and ceilings, add ceiling coves, and build joinery.

  4. Coordinate with services. Create openings from the MEP model, then run clash detection and share clash reports before drawings are issued.

  5. Document, check and export. Produce sheets, legends and documentation from the model, run the QA & Cleanup checks, and export the outputs the project needs.

Because each step works on the same model, a design change updates the detail and the drawings together, rather than starting another round of manual edits.

Already working on a live project

XD Fit-Out is already in use on the Marina Lifestyle Hotel at Amaala in Saudi Arabia, and is planned for the DEPA project next. On the Marina Lifestyle Hotel, it connects fit-out design data to sequencing and information delivery workflows within the BIM environment, so fit-out is managed with the same rigour as the rest of the project.

Hospitality projects like this are a strong test of the tool. A hotel combines highly repetitive guest rooms with one-off public spaces, and both need to be documented, coordinated and delivered to a demanding standard.

Who it is for

XD Fit-Out is built for the teams who carry fit-out from design to site:

  • Architects and interior designers who want to spend less time modelling repetitive detail and more time on the design itself.

  • Fit-out contractors who need accurate framing, openings and quantities they can build from.

  • BIM managers who need fit-out models with clean data that meet the same standards as every other discipline.

  • Manufacturers and modular suppliers who need model detail that translates into DfMA-ready information.

It is suited to retail, office and hospitality projects, especially those with many similar spaces or rollouts across multiple sites.

Part of a growing family

XD Fit-Out joins XD Landscape and XD Cladding in our suite of Revit plug-ins. Each one follows the same path: a real problem on a real project, solved by our team under delivery pressure, then turned into a tool other teams can use.

XD Cladding grew from Kuwait International Airport Terminal 2. XD Landscape grew from slope and drainage coordination on projects with Qiddiya, Amaala and the Red Sea Company. XD Fit-Out grew from modular retail and hospitality work. Together, they cover three of the disciplines where standard authoring tools leave the most manual work behind.

XD Fit-Out, the Revit plug-in for faster fit-out design, on a laptop in a meeting room

Built with the people who will use it

We are opening XD Fit-Out to a waiting list first. Early users get access before public release, can share feedback on core features, and will receive product updates as the tool develops. That feedback will shape what we build next.

If your team works on fit-out in Revit, we would like to hear which tasks take the most time, which outputs your clients ask for, and where today's tools fall short.

Conclusion

Fit-out is where the same details are drawn, modelled and documented hundreds of times. That repetition is exactly what automation does best. XD Fit-Out takes the slow, manual steps out of fit-out delivery, from CAD layouts and clean data to framing, finishes, MEP openings, documentation and model checks, and keeps them inside the Revit model where they belong.

The result is less time spent redrawing, fewer coordination surprises on site, and fit-out models detailed enough to support modular and DfMA delivery.

Join the XD Fit-Out waiting list and get early access →

BLOGS & Insights

BLOGS & Insights

OTHER ARTICLES

OTHER ARTICLES

  • LET'S TALK

  • ASK A QUESTION

  • GET IN TOUCH

london

+44 7534 7 29992



Design District, C3 Building, 13 Soames Walk, Greenwich Peninsula, SE10 0AX




SEE ON MAP LONDON

info@xdhouse.co

dubai

+971 55 589 5395


Dubai, UAE | Downtown, Souk Al Bahar, Saaha Offices B, 532. | P.O. Box 215626.

SEE ON MAP DUBAI

info@xdhouse.co

GET IN TOUCH

We're excited to connect with you! Fill out the form below, and let's embark on the journey of turning your vision into a reality.

Copyright © 2025 XD HOUSE. All rights reserved.

  • LET'S TALK

  • ASK A QUESTION

  • GET IN TOUCH

london

+44 7534 7 29992



Design District, C3 Building, 13 Soames Walk, Greenwich Peninsula, SE10 0AX




SEE ON MAP LONDON

info@xdhouse.co

dubai

+971 55 589 5395


Dubai, UAE | Downtown, Souk Al Bahar, Saaha Offices B, 532. | P.O. Box 215626.

SEE ON MAP DUBAI

info@xdhouse.co

GET IN TOUCH

We're excited to connect with you! Fill out the form below, and let's embark on the journey of turning your vision into a reality.

Copyright © 2025 XD HOUSE. All rights reserved.

  • LET'S TALK

  • ASK A QUESTION

  • GET IN TOUCH

london

+44 7534 7 29992



Design District, C3 Building, 13 Soames Walk, Greenwich Peninsula, SE10 0AX




SEE ON MAP LONDON

info@xdhouse.co

dubai

+971 55 589 5395


Dubai, UAE | Downtown, Souk Al Bahar, Saaha Offices B, 532. | P.O. Box 215626.

SEE ON MAP DUBAI

info@xdhouse.co

GET IN TOUCH

We're excited to connect with you! Fill out the form below, and let's embark on the journey of turning your vision into a reality.

Copyright © 2025 XD HOUSE. All rights reserved.